Mary Bopp, Author at MC Machinery

MCMachineryEditor3

About Mary Bopp

This author has not yet filled in any details.
So far Mary Bopp has created 98 blog entries.

Innovate Technologies Holding 25th Anniversary Celebration at MC Machinery Headquarters on Thursday, May 4

Innovate Technologies, Inc. is holding its 25th anniversary celebration at the MC Machinery headquarters in Elk Grove Village, Ill. on Thursday, May 4 from 9 a.m. to 5 p.m. The free event will feature a catered lunch and awards presentation to Innovate’s top 25 customers in Illinois and Indiana, followed by drawings for five-day vacations (airfare and hotel) to Marcos Island, Fla., Scottsdale, Ariz., Hilton Head, S.C. and Las Vegas. The event also will include seminars on: • Five-axis milling strategies • Unattended operation and process optimization of Mitsubishi ram EDMs • Graphite/hard-milling strategies with automation • The top 10 ways to run production on Mitsubishi wire EDMs Attendees can visit the MC Machinery showroom to learn about the ...

By |2024-07-22T11:37:35-05:00March 20th, 2023|Event|Comments Off on Innovate Technologies Holding 25th Anniversary Celebration at MC Machinery Headquarters on Thursday, May 4
Read More

MC Machinery to Showcase EDM and Milling Technology at Eastec May 16-18

MC Machinery will be showcasing the new Mitsubishi artificial intelligence-enabled sinker EDM as well as other EDM and milling machines at Eastec in booth 1420, where Mitsubishi EDM experts will be available to answer questions and provide live demos. Eastec 2023 is scheduled for May 16-18 at the Eastern States Exposition in West Springfield, Mass. Mitsubishi EDM machines at Eastec will include the Mitsubishi SG12 sinker EDM, the Mitsubishi MV2400 wire EDM and the Ingersoll Eagle V550 five-axis milling center. Mitsubishi Sinker EDM The SG12 sinker EDM’s AI and IoT technologies combine to provide insight into and control over its productivity, efficiency, uptime, maintenance and more. The SG12 sinker comes with MC Machinery’s Remote360™ cloud-based machine monitoring system, which ...

By |2024-07-22T11:38:27-05:00March 20th, 2023|Event|Comments Off on MC Machinery to Showcase EDM and Milling Technology at Eastec May 16-18
Read More

MC Machinery/Mitsubishi Laser Holding Open House at West Coast Technology Center in Cypress, Calif. on March 30

MC Machinery/Mitsubishi Laser is holding an open house at its West Coast Technology Center in Cypress, Calif. on Thursday, March 30 from 9 a.m.to 5 p.m. Lasers, press brakes and automation systems on display and available for demonstration will include: The Mitsubishi GX-F ADVANCED artificial intelligence-enabled fiber laser Mitsubishi Diamond BB and Diamond BH press brakes Laser automation systems The event also will include seminars on topics including laser technology, automation and the Remote360™ remote monitoring system. MC Machinery’s West Coast Technology Center, located at 11170 Valley View St., provides MC Machinery customers throughout the region with local access to direct sales, service, application and training support. Opened in 1993, the center includes laser and EDM showrooms, service department, training areas, conference rooms, applications and ...

By |2024-07-22T12:03:17-05:00March 3rd, 2023|Event|Comments Off on MC Machinery/Mitsubishi Laser Holding Open House at West Coast Technology Center in Cypress, Calif. on March 30
Read More

Adam Dimitroff Articles Featured in Canadian Metalworking

Be sure to check out articles by EDM/Machining regional sales representative Adam Dimitroff, who writes regularly for Canadian Metalworking. His most recent articles include: Productivity vs. Efficiency: While the terms efficiency and productivity sometimes are used interchangeably, the two are not synonymous. Understanding how to maximize both efficiency and productivity is the key to operating a successful and profitable manufacturing company. Time is Money in Every Shop: How to maximize productivity and efficiency through maintenance, consumables, optimizing setup, training, standardization, design for manufacturing and automation. Understanding Machinability: Learn about what impacts machinability, how to alter a material’s machinability and how materials are rated. Dimitroff has a bachelor’s degree in mechanical engineering from the University of Guelph (Ontario) and several years of international ...

By |2024-07-22T12:04:15-05:00March 3rd, 2023|Press Release|Comments Off on Adam Dimitroff Articles Featured in Canadian Metalworking
Read More

Recupido Promoted to EDM/Machining Midwest Regional Service Manager

Ron Recupido has been promoted to MC Machinery EDM/machining regional service manager for the Midwest. After earning an associate degree in electronics from DeVry University, Recupido began his career at MC Machinery in 1990 as an installer in the service department. Prior to this most recent promotion, he was service department supervisor for EDM/machining. As Midwest regional service manager, Recupido oversees a team that services customers in North Dakota, South Dakota, Nebraska, Kansas, Missouri, Iowa, Minnesota, Wisconsin and Illinois. “Ron’s more than 32 years of exemplary performance speaks for itself,” said MC Machinery North American Sales Manager for EDM/Machining Alan Hallman. “His deep knowledge of EDM and machining is a tremendous asset to our customers.” To learn more about ...

By |2024-08-19T10:41:02-05:00January 30th, 2023|Press Release|Comments Off on Recupido Promoted to EDM/Machining Midwest Regional Service Manager
Read More

What is Dynamic Power Reserve?

MC Machinery Laser Applications Engineer Ryan Conroy explains Dynamic Power Reserve (DPR), a technology used in Mitsubishi fiber laser oscillators to ensure stable, consistent processing. DPR maintains rated power throughout the lifetime of the oscillator by holding power in reserve. This prevents gradual or immediate power loss. With DPR, 50 percent of diodes in a module would need to fail to experience any type of power loss. To learn more about the technology preventing the loss of diodes, check out our video on Extended Lifetime Structure. LEARN MORE

By |2024-07-22T12:08:03-05:00January 13th, 2023|Ask the Expert|Comments Off on What is Dynamic Power Reserve?
Read More

What is Extended Lifetime Structure?

MC Machinery Laser Applications Engineer Ryan Conroy explains the Mitsubishi laser technology called Extended Lifetime Structure (ELS), which increases the lifespan of each of the modules inside of the oscillator. ELS wires each diode in the module in parallel—if one diode is lost, the others are not affected. This also lowers the load placed on other modules if one diode fails, preventing damage and allowing the machine to continue operating. When ELS and Dynamic Power Reserve are combined, half of the diodes in a module would have to fail to result in power loss. This technology allows MC Machinery to provide a five-year parts warranty on our fiber laser oscillators, which are fully serviceable in the field by our ...

By |2024-07-22T12:09:03-05:00January 13th, 2023|Ask the Expert|Comments Off on What is Extended Lifetime Structure?
Read More

Ask the Expert: Program Editing on M800 Control

In this Ask the Expert video, MC Machinery’s wire EDM applications expert Trent Langellier shares insight on the M800 control while using our MV1200 wire EDM. Sometimes as an operator it's necessary to manually edit the G Code in a program. This can prove to sometimes be very difficult trying to find the exact point that you want to edit especially in very long programs. Sometimes you need to sift through hundreds or thousands of lines of code to find the spot that you want to change. After checking the program, the tool path will be displayed on the screen. When a line of geometry is selected in the program, the corresponding line of G Code will be tagged ...

By |2024-07-22T12:11:50-05:00August 2nd, 2022|Ask the Expert|Comments Off on Ask the Expert: Program Editing on M800 Control
Read More

MC Machinery Systems Announces Promotions

Three members of the MC Machinery team, who have a combined nearly 70 years of service, have been promoted: Joe Cisneroz, to customer service general manager; Dave Kloos, to customer support general manager; and Doug Conroy, to director of information technology and business systems. Joe began his career at MC Machinery 34 years ago as a field service technician, later becoming regional service manager, EDM/milling senior service manager and EDM/milling national service manager. He earned a bachelor’s degree in electronics engineering technology from DeVry University. In his new role, Joe is responsible for managing field service, service inside sales and repair center as well as service/parts invoicing and technical phone support.  Dave began his career at MC Machinery 18 years ago as ...

By |2024-08-19T10:41:26-05:00August 1st, 2022|Press Release|Comments Off on MC Machinery Systems Announces Promotions
Read More

Supply Chain Challenges: “Like Playing a Game of Whack-a-Mole”

Manufacturers continue to face supply chain challenges that are impacting delivery time, inventory management and costs. In this episode, MC Machinery Senior Purchasing Manager Brian Howard, Senior Buyer Sheila Uribe and CPG Group National Sales Manager George Johnson discuss the current supply chain challenges facing manufacturers, how they are adjusting to these challenges and expectations for the future. They discuss: • Just-in-time manufacturing has become "just in case" • How overseas port closures, California trucker protests and a contract labor dispute  between the International Longshore and Warehouse Union and the Pacific Maritime Association are impacting shipments • Shipping costs remain high, including surcharges and port fees • Supply chain issues are dynamic and require finding creative solutions on the fly Produced ...

By |2024-08-19T10:41:33-05:00August 1st, 2022|Press Release|Comments Off on Supply Chain Challenges: “Like Playing a Game of Whack-a-Mole”
Read More

Supply Chain Challenges: “Like Playing a Game of Whack-a-Mole”

For most small- and mid-sized manufacturers, being competitive while turning a profit isn’t easy. Survival requires investment. Staub Manufacturing Solutions co-founder and President Steve Staub discusses how investments in automation have helped his company expand while also giving employees opportunities to grow their job responsibilities and increase their wages.

By |2024-08-19T10:41:38-05:00July 28th, 2022|Podcast|Comments Off on Supply Chain Challenges: “Like Playing a Game of Whack-a-Mole”
Read More

Erik Sweede Joins MC Machinery as Regional Sales Representative for EDM/Machining

Erik Sweede has joined the MC Machinery team as the Northeast regional sales manager for EDM and machining. Based in Philadelphia, Sweede covers New York, New Jersey, Pennsylvania, Connecticut, Massachusetts, Maine, Rhode Island, Maryland, Delaware, Washington, D.C. and Vermont. Along with more than 15 years of manufacturing sales experience, Sweede has a bachelor’s degree in business administration from the University of Toledo and a master’s degree in metallurgical engineering from Purdue University Northwest. “Erik’s experience and technical background will be very valuable to our EDM and milling customers in the northeastern U.S.,” said MC Machinery Systems North American EDM/Machining Sales Manager Alan Hallman. “His engineering capabilities and proven record of building strong sales teams will serve MC Machinery and our ...

By |2024-08-19T10:41:43-05:00July 8th, 2022|Press Release|Comments Off on Erik Sweede Joins MC Machinery as Regional Sales Representative for EDM/Machining
Read More

MC Machinery Systems, Inc.

85 Northwest Point Blvd.

Elk Grove Village, IL 60007

 

Main Phone: 630-860-4210
Email: sales@mcmachinery.com

CONTACT US

Questions, comments, feedback? We’re here to help.

Go to Top